Are your cheeks starting to sag or your jawline looking less defined? You may want to improve your facial contours but worry about discomfort or downtime. Non-invasive energy-based treatments are an option for people who want firmer-looking skin without too much disruption to their daily routine. But what results can you expect from XERF, how much does it cost in Hong Kong, and how does it differ from Thermage FLX and Ultherapy? This guide covers how XERF works, who it may suit, and what to know before and after treatment.
What Is XERF? How Dual-Frequency Monopolar Radiofrequency Works
XERF is a non-invasive monopolar radiofrequency (RF) device from Cynosure Lutronic. It combines two frequencies, 6.78 MHz and 2 MHz, and offers three depth settings—shallow, medium and deep—so practitioners can adjust the treatment to the area and condition of the skin.
Monopolar RF delivers energy that generates heat across a volume of tissue, a process known as volumetric heating. XERF aims to stimulate collagen remodelling, which may help improve the appearance of skin laxity and facial contours. Tissue studies released by the manufacturer have also observed collagen changes at different depths.
Rather than relying on energy intensity alone, XERF combines adjustable treatment depth, timed energy delivery and surface cooling. The goal is not to use the deepest setting or the highest energy level, but to select settings that suit the individual.
Four Key XERF Technologies Designed to Address the Drawbacks of Traditional RF
1. World-First 6.78 MHz and 2 MHz Dual-Frequency Technology
- 6.78 MHz targets the superficial to middle layers of the dermis to firm the skin, soften fine lines and improve elasticity.
- 2 MHz penetrates more deeply to reach deeper fat and the superficial musculoaponeurotic system (SMAS), a fibromuscular layer beneath the skin, to provide structural support.
2. Wave Fit Pulse Technology
XERF delivers energy in intermittent pulses to allow heat to build more evenly. This is designed to significantly reduce the sharp, stinging sensation associated with traditional RF treatments.
3. ICD Intelligent Epidermal Cooling and Temperature Monitoring
Dynamic cooling protects the skin’s surface with each pulse. If the tip temperature exceeds 43°C, the system automatically stops delivering energy. The feature is designed to keep treatment comfortable and pain-free while protecting against burns.
4. Spider Pattern Electrode and Large 6 cm² Treatment Tip
XERF uses a spiderweb-patterned electrode to distribute energy more evenly and reduce heat build-up around the edges of the treatment tip. The facial tip measures 2 × 3 cm, giving it a surface area of 6 cm² and helping shorten the overall treatment time.
Who Might Benefit from XERF?
People Looking to Improve Facial Sagging and Jawline Definition
If you are concerned about sagging cheeks, jowls or a less defined jawline, a consultation can help you decide whether XERF is suitable. Small studies have reported improvements in facial laxity, contours and some measures of skin quality. These findings are preliminary, however, and results vary from person to person.
An assessment should distinguish whether a less defined contour is mainly due to loose skin, fat distribution or other structural factors. The same XERF settings are not suitable for every facial contour concern.
People Concerned About Fine Lines, Loss of Elasticity or Skin Texture
In addition to facial contouring, XERF may be considered for skin laxity and certain skin quality concerns. One small retrospective study observed improvements in wrinkles, skin evenness and the appearance of pores, but found no significant change in pigmentation measures. XERF should therefore not be treated as a skin-brightening or dark-spot treatment.
If your goal is a gradual improvement in firmness and skin appearance rather than a dramatic, surgical-level change, a consultation can help you set realistic expectations.
People Looking for a Non-Invasive Skin-Firming Treatment
XERF does not involve incisions or injections. The manufacturer also presents it as a treatment that does not require topical anaesthetic and generally does not require time off work, making it an option for people who want minimal disruption to their routine.
Non-invasive does not mean risk-free. A skin and health assessment is still needed before treatment.
Is Your Skin Suitable for XERF? When Should You Postpone Treatment?
Make Sure Your Skin Is in a Stable Condition
When booking, tell the clinic if the treatment area has any wounds, infection, significant irritation, an eczema flare-up or severe inflammatory acne. Your doctor can then decide whether the skin condition should be addressed before you undergo an energy-based treatment.
Do not rely solely on claims that a treatment is “suitable for sensitive skin.” Restrictions depend on the device’s instructions for use and the condition of your skin. For example, Ultherapy’s official instructions list open wounds and severe or cystic acne in the treatment area as contraindications. The suitability criteria for one device should not be applied to another.
What to Disclose During Your Consultation
Tell your doctor if any of the following applies so they can assess your suitability based on the device’s instructions for use and your individual circumstances:
- You are pregnant or breastfeeding.
- You have a pacemaker, defibrillator or other implanted electronic device.
- You have metal implants, facial implants or permanent fillers in the treatment area.
- You have recently had hyaluronic acid filler injections, a thread lift, another energy-based treatment or surgery.
- You have a condition that affects healing, a significant medical history or are taking medication that could be relevant to treatment.
Use this list to guide what you disclose, not to decide for yourself whether treatment is safe. Thermage, another monopolar RF device, expressly lists implanted electronic devices such as pacemakers as a contraindication and identifies several groups in which treatment has not been adequately studied. Suitability for XERF should be determined using XERF’s own instructions for use.
What Happens During XERF Treatment? Does It Hurt?
A typical XERF session involves the following steps:
- Consultation and skin assessment. The practitioner reviews your areas of concern, the degree of skin laxity, previous treatments and relevant health information, then discusses your goals.
- Treatment planning. The practitioner selects the depth and intensity for each area. XERF offers three depth settings, ten intensity levels and real-time impedance feedback—a measure of how much the tissue resists the flow of electrical energy.
- Cleansing and application of a conductive medium. The skin is prepared and a suitable medium is applied to help transmit RF energy.
- Energy delivery by area. The practitioner delivers energy in pulses with cooling while monitoring the skin’s response and checking how the treatment feels.
- Post-treatment check. The practitioner checks your skin and provides personalised aftercare and follow-up instructions.
The manufacturer describes XERF as a treatment that does not require topical anaesthetic, and small studies have found it generally well tolerated. However, not needing numbing cream does not mean everyone will find it painless. The treatment area, device settings and individual sensitivity all influence how it feels.
You may feel warmth, but you should not try to endure persistent burning pain. Tell your practitioner what you feel so they can adjust the treatment if needed.
How Long Do XERF Results Last? What to Expect Over Time
XERF results are described as developing gradually as the skin responds to treatment, rather than appearing all at once and then abruptly fading. The changes are typically described in three stages, from immediately after treatment to several months later.
1. Immediately After Treatment to Day 7: Subtle Firming and Definition
- What happens in the tissue: As heat from the 6.78 MHz and 2 MHz frequencies reaches the dermis and deeper tissues, heating the collagen fibres to around 38–43°C triggers immediate contraction within their three-dimensional structure.
- What you may notice: Your face may feel slightly firmer, with a subtle lift or more defined contours immediately after treatment. Some people may notice mild pinkness or warmth as local circulation increases. This typically subsides within a few hours to 24 hours without interrupting daily activities.
2. Two Weeks to One Month: New Collagen Formation and Smoother-Looking Skin
- What happens in the tissue: Heating triggers a tissue repair response that activates fibroblasts, the cells that produce collagen and elastin, and starts increasing production of both proteins.
- What you may notice: As mild swelling subsides and new collagen fibres become part of the skin’s supporting matrix, the skin may look smoother and more radiant. Fine lines may soften, and the jawline and areas around the corners of the mouth may gradually look firmer.
3. Two to Six Months: Peak Remodelling and a More Defined V-Shaped Jawline
- What happens in the tissue: The original treatment timeline describes this as the peak remodelling phase. Collagen in the more superficial dermis targeted by 6.78 MHz has reorganised, while the deeper effects of 2 MHz on the fibrous partitions within the fat and on the SMAS are described as reaching their peak, improving tissue elasticity and support.
- What you may notice: The jawline may look sharper, while jowls and a double chin may appear less prominent, giving the face a naturally firmer, more V-shaped contour. XERF’s pulsed delivery and depth-specific heating are intended to firm the skin while preserving natural facial fullness, rather than creating the overly hollow cheek appearance sometimes associated with traditional RF treatments.
How Long Can XERF Results Last?
- Typical duration: The full effects of a single session are described as lasting around 6 to 12 months. Manufacturer observations and follow-up with many users suggest that results can last around a year.
- How results fade: Results do not suddenly disappear at the 12-month mark. They gradually diminish as natural ageing and collagen turnover continue. An annual XERF session may be considered as a maintenance option.
XERF vs Thermage FLX vs Ultherapy: How Do They Compare?
Comparison | XERF Dual-Frequency RF | Thermage FLX | Ultherapy |
Energy type | Dual-frequency monopolar RF (6.78 MHz + 2 MHz) | Single-frequency monopolar RF (6.78 MHz) | Microfocused ultrasound (MFU) |
Heating method | Continuous volumetric heating at multiple depths using two frequencies | Single-layer volumetric heating | Heating at discrete focal points |
Treatment depth | From the dermis through the fat layer to the SMAS | From the dermis to the upper fat layer | Targets specific depths, including the SMAS |
Main benefits | Comfortable, pain-free treatment; customised depth settings; designed to preserve cheek fullness and improve skin quality | Established skin-tightening treatment that stimulates collagen production | Lifts deeper structures and improves the appearance of sagging contours |
Discomfort | Very low; mainly warmth, with no topical anaesthetic for most people | Moderate to high; topical anaesthetic, vibration or cooling may be used | Moderate to high; may feel like a deep, sharp or prickling sensation |
Downtime | None; makeup can be applied immediately | None | None |
How Much Does XERF Cost in Hong Kong?
Price Range
A single XERF session in Hong Kong typically costs around HK$6,000 to HK$18,000 or more. The price can vary depending on whether it is a promotional trial or a standard package, which areas are treated and how many pulses are included.
What Affects the Price?
- Number of pulses. Typical examples include 200–300 pulses for a targeted area, 400 for the full face, or 600 for the full face, double chin and neck.
- Who performs the treatment. Pricing may vary depending on whether the procedure is performed by a suitably certified doctor or an experienced practitioner trained in energy-based aesthetic treatments.
XERF Aftercare and Precautions
Moisturise and Protect Your Skin from the Sun
- XERF’s Hong Kong distributor recommends basic moisturising and sun protection after treatment. Side effects reported in small studies were mostly mild and short-lived, but reactions can vary.
- Start with gentle products your skin already tolerates, and adjust your routine according to your practitioner’s instructions.
Pause Potentially Irritating Skincare and Check Before Resuming High-Heat Activities
- When to resume acids, exfoliants or other potentially irritating products depends on how your skin responds and the products you use. The Hong Kong distributor’s public guidance focuses on moisturising and sun protection and does not specify a universal rule to stop using vitamin C for a week.
- Before leaving the clinic, ask when you can resume exercise, use a sauna, attend hot yoga or undergo other aesthetic treatments. If your skin is still noticeably red, warm or uncomfortable, do not ignore those symptoms simply because the treatment is described as having “no downtime.”
Watch for Unusual Skin Reactions
- If you experience persistent or worsening pain, blistering, broken skin, significant changes in skin colour or unusual sensations, contact the treatment provider and seek medical attention promptly. Cooling and temperature monitoring help manage heat but do not eliminate the risks of energy-based treatments. Official safety information for other RF devices also lists uncommon complications such as burns.
XERF Frequently Asked Questions
1. Can One XERF Session Make a Difference? How Soon Will I See Results?
You may notice some immediate firming from a single session. As collagen remodels and new collagen forms, results are typically most noticeable one to three months after treatment.
2. How Long Do XERF Results Last?
Results generally last 6 to 12 months. This can vary with age, lifestyle and skincare habits.
3. Does XERF Hurt? Will I Need Numbing Cream?
Most people mainly feel warmth beneath the skin and find the treatment comfortable. Topical anaesthetic is generally not needed.
4. What Are the Side Effects of XERF? Is There a Risk of Burns?
Side effects are described as uncommon, with mild redness possible after treatment. XERF uses intelligent epidermal cooling and automatically stops delivering energy if the tip temperature exceeds 43°C. These features are designed to reduce the risk of burns, not eliminate it.
5. How Do I Choose Between XERF and Thermage?
If you are particularly sensitive to pain and want to address skin quality and firmness at different depths, XERF may be the preferred option. If you are comfortable with potentially greater discomfort and want an established single-frequency RF treatment that stimulates collagen production, you may consider Thermage.
6. Can XERF Replace Ultherapy?
XERF’s 2 MHz setting is described as reaching the SMAS, while the device delivers heat across multiple tissue layers. Ultherapy uses ultrasound to heat discrete focal points and lift deeper structures. If your priority is overall facial firming and you are concerned about pain, XERF may be considered as a more comfortable alternative or as part of a combined treatment plan.
7. Can I Have XERF If I Have Sensitive Skin, Eczema or Inflamed Acne?
If your skin is acutely inflamed, you are experiencing an eczema flare-up or you have an open wound, postpone treatment. Wait until your skin has stabilised and have it assessed by a qualified professional before proceeding.
8. Can I Have XERF After Hyaluronic Acid Fillers or a Thread Lift?
If you have recently had filler injections or a thread lift, tell your doctor or the practitioner assessing you. The appropriate waiting period depends on the material used and the area treated.
9. Can I Wear Makeup, Exercise or Have Other Aesthetic Treatments After XERF?
XERF is described as having no downtime, so you can generally apply makeup and resume light daily exercise immediately. The original guidance recommends avoiding strenuous exercise in hot environments, hot yoga and potentially irritating treatments such as acid peels for one week. Follow your practitioner’s instructions based on how your skin responds.
Anya Glow One-to-One Consultation: An XERF Plan Tailored to Your Skin
Choosing XERF is about more than comparing pulse counts or asking for a higher energy setting. Start with what you want to improve, then set treatment goals that fit your needs.
Anya Glow is listed as a treatment centre on the XERF Hong Kong distributor’s website. During a one-to-one consultation, you can discuss the areas that concern you most, your previous treatments and how your skin has responded to them. Your treatment plan should take account of skin thickness, fat distribution and facial structure so the treatment area, number of pulses and energy depth can be tailored to you.
[Book Your One-to-One XERF Consultation at Anya Glow]